3d printer air filter - Wanhao i3

update Updated: 11/15/2018

Zimpure - Wanhao i3 instructions build

  • Step 1. Print the adapters

    For the Wanhao i3, you will need to download your suction head on Thingiverse here, and follow the instructions. 

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

    This is your last print without Zimpure!

  • Step 2. Installing the Wanhao i3 Suction Head

    First, install the Wanhao i3 suction head that you downloaded above on your extruder.

  • Step 3. Installing the Hose

    Then, insert the hose into the i3 Suction Head and plug the other side of the hose into Zimpure. 

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! First, depending on the cooling fan you’re using, you could have to lower it to have a suction rate efficient enough.

    Please note that you need to turn your Zimpure ON only after than your i3 has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!