3d printer air filter - Delta Kossel

update Updated: 11/15/2018

Zimpure - Delta Kossel instructions build

  • Step 1. Print the adapters

    For the Delta Kossel, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLSuctionHead.STL ABS 0.19 NO HIGH

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

    This is your last print without Zimpure!

  • Step 2.Installing the KosselSuctionHead

    Clip the KosselSuctionHead to your extruder as shown on the second picture below.

  • Step 3. Installing the Delta Kossel Suction Head

    Insert the hose into Delta Kossel holder and plug the other side of the hose into Zimpure.

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! First, depending on the cooling fan you’re using, you could have to lower it to have a suction rate efficient enough.

    Please note that you need to turn your Zimpure ON only after than your Kossel has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!